Pull Client Configuration Not found

Welcome Forums DSC (Desired State Configuration) Pull Client Configuration Not found

This topic contains 16 replies, has 2 voices, and was last updated by

M
 
Participant
1 year, 11 months ago.

  • Author
    Posts
  • #68055
    M

    Participant
    Points: 0
    Rank: Member

    Hi everybody,
    I have two servers windows 2016 in wmf5.1.
    My dsc pull server is configured in HTTPS and registration keys.
    I configured the LCM and made a configuration to pull it to my client.

    LCM Configuration:
    Node $NodeName
    {
    Settings
    {
    RefreshMode = 'Pull'
    ConfigurationMode="ApplyAndAutoCorrect"
    CertificateID = 'mycertificatethumbprint'
    }

    ConfigurationRepositoryWeb CORE-O_PullSrv
    {
    ServerURL = "https://myserver:8080/PSDSCPullServer.svc"
    CertificateID = 'mycertificatethumbprint'
    RegistrationKey = 'myregistrationKey'
    ConfigurationNames = @('Server2016')

    }

    Mof file are present in ... DscService\Configuration
    I renamed my mof file in Server2016.mof

    But in the client when i tried to update-dsconfiguration -wait -verbose there is an error:
    Configuration Not found.
    In Windows Event : ResourceNotFound(404).
    Could you give me some advices?

  • #68080

    Participant
    Points: 0
    Rank: Member

    Hi,

    your mof and checksum are directly in dsc/configurations/Server2016.mof ?

    Thank's

  • #68101
    M

    Participant
    Points: 0
    Rank: Member

    Hi,
    My MOF file renamed in Server2016.mof and my checksum are present in dsc/configurations
    I tried to rename the checksum file too in Server20106.mof.checksum.
    I have the same result.
    The client doesn't pull his configuration

    • #68104

      Participant
      Points: 0
      Rank: Member

      Try to make first ConfigurationMode="ApplyAndMonitor" and show us the result

  • #68112
    M

    Participant
    Points: 0
    Rank: Member

    With ApplyAndMonitor this is the result:

    
    ...(AgentId='9FC96A5D-157E-11E7-A0E0-005056951FCF')/GetDscAction 
    pour AgentId 9FC96A5D-157E-11E7-A0E0-005056951FCF avec l'erreur serveur «ResourceNotFound(404)».
    ....
        + CategoryInfo          : ResourceUnavailable: (root/Microsoft/...gurationManager:String) [], CimException
        + FullyQualifiedErrorId : WebDownloadManagerGetActionNodeConfigurationNotFound,Microsoft.PowerShell.DesiredStateConfiguration.Commands.GetDscActionCommand
        + PSComputerName        : localhost
    

    The same error

    • #68121

      Participant
      Points: 0
      Rank: Member

      ok
      I had the same problem when I use dsc pull server HTTPS with a certificate. But when I used with non certificate all was run successfuly.
      try this:
      Pull server:

      configuration DSCPullServer
      {
      param
      (
      [string[]]$NodeName = 'localhost'
      )

      Import-DscResource -ModuleName xPSDesiredStateConfiguration #-ModuleVersion 3.7.0.0
      Import-DscResource -ModuleName PSDesiredStateConfiguration

      Node $NodeName
      {
      WindowsFeature DSCServiceFeature
      {
      Ensure = 'Present'
      Name = 'DSC-Service'
      }

      WindowsFeature IIS
      {
      Ensure = 'Present'
      Name = 'Web-Server'
      }

      xDscWebService DSCPullSRV
      {
      Ensure = 'Present'
      EndpointName = 'DSCPullSRV'
      Port = 8080
      PhysicalPath = "$env:SystemDrive\inetpub\DSCPullSRV"
      CertificateThumbPrint = "AllowUnencryptedTraffic"
      ModulePath = "$env:PROGRAMFILES\WindowsPowerShell\DscService\Modules"
      ConfigurationPath = "$env:PROGRAMFILES\WindowsPowerShell\DscService\Configuration"
      RegistrationKeyPath = "$env:PROGRAMFILES\WindowsPowerShell\DscService"
      AcceptSelfSignedCertificates = $true
      State = 'Started'
      DependsOn = '[WindowsFeature]DSCServiceFeature'
      UseSecurityBestPractices = $false
      }
      }
      }
      DSCPullServer -OutputPath c:\dsc\DSCPullServer
      Start-DscConfiguration -Path $env:SystemDrive\dsc\DSCPullServer -Wait -Verbose -force

      and for LCM in your node:

      [DSCLocalConfigurationManager()]
      configuration PullClient
      {
      Node localhost
      {
      Settings
      {
      RefreshMode = 'Pull'
      RefreshFrequencyMins = 30
      RebootNodeIfNeeded = $true
      ConfigurationMode = 'ApplyAndAutoCorrect'
      ConfigurationModeFrequencyMins = 15
      }
      ConfigurationRepositoryWeb DSC-Pull
      {
      ServerURL = 'http://yourserver:8080/PSDSCPullServer.svc'
      RegistrationKey = 'your registrationkey'

      AllowUnsecureConnection = $true #Use this parameter only if you do not have a certificate installed on the pull server
      }

      ReportServerWeb DSC-Pull
      {
      ServerURL = 'http://yourserver:8080/PSDSCPullServer.svc'
      RegistrationKey = 'your registrationkey'
      AllowUnsecureConnection = $true
      }
      }
      }
      PullClient
      Set-DSCLocalConfigurationManager localhost –Path .\PullClient –Verbose -force

  • #68164
    M

    Participant
    Points: 0
    Rank: Member

    I tried.
    I make a update-dscconfiguration -wait -verbose
    So no error but the client doesn't find a configuration for him so no update.
    In dscservice\configuration on my pull server i have my computername.mof and computername.mof.checksum, is it correct or must i use a guid for the mof file???

    • #68179

      Participant
      Points: 0
      Rank: Member

      Hi
      -on your node
      do: new-guid (copy this guid)

      – on pull server
      rename your mof and checksume with this guid

      rerun your LCM and wait untill "ConfigurationModeFrequencyMins = 15"

  • #68185
    M

    Participant
    Points: 0
    Rank: Member

    Ok Thanks.
    But how the client knows it's his configuration?
    Must i precise a configurationID in the LCM configuration with this Guid?

  • #68194
    M

    Participant
    Points: 0
    Rank: Member

    With Guid and configurationID in the LCM:

    http://myserver:8080///PSDSCPullServer.svc/Action(ConfigurationId='5e5f465e-10f0-4281-8a6f-b80a9da9ee48')/GetAction : configuration 5e5f465e-10f0-4281-8a6f-b80a9da9ee48 valide 
    introuvable.
        + CategoryInfo          : ResourceUnavailable: (root/Microsoft/...gurationManager:String) [], CimException
        + FullyQualifiedErrorId : WebDownloadManagerGetActionConfigurationNotFound,Microsoft.PowerShell.DesiredStateConfiguration.Commands.GetDscActionCommand
        + PSComputerName        : localhost
     
    

    With the GUID and without configuratioID in the LCM:
    result of update-dscconfiguration -wait -verbose
    No error but he can't find a configuration

        [] Configuration not found on the pull server, so no action.
    

    Really i don't understand

    • #68218

      Participant
      Points: 0
      Rank: Member

      Excuse me. use this for your LCM on your node

      [DSCLocalConfigurationManager()]
      configuration PullClient
      {
      Node localhost
      {
      Settings
      {
      RefreshMode = 'Pull'
      RefreshFrequencyMins = 30
      RebootNodeIfNeeded = $true
      ConfigurationMode = 'ApplyAndAutoCorrect'
      ConfigurationModeFrequencyMins = 15
      }
      ConfigurationRepositoryWeb DSC-Pull
      {
      ServerURL = 'http://Your_server:8080/PSDSCPullServer.svc'
      RegistrationKey = 'your_registrationkey'
      ConfigurationNames = @('service')
      AllowUnsecureConnection = $true #Use this parameter only if you do not have a certificate installed on the pull server
      }

      ReportServerWeb DSC-Pull
      {
      ServerURL = 'http://Your_server:8080/PSDSCPullServer.svc'
      RegistrationKey = 'your_registrationkey'
      AllowUnsecureConnection = $true
      }
      }
      }
      PullClient
      Set-DSCLocalConfigurationManager localhost –Path .\PullClient –Verbose

      where "service" will be the same on your pull server in dsc/configurations (service.mof and service.mof.checksum) . make sure this two files are directly in dsc/configurations not in a directory like (dsc/configurations/service/service.mof or .checksum)

  • #68232
    M

    Participant
    Points: 0
    Rank: Member

    Thanks you Arnold.
    It works fine !
    Now i'll search for configure it in https

  • #68235

    Participant
    Points: 0
    Rank: Member

    Ok good.
    Let's me know if you fix it in https. Are you french?

  • #68238
    M

    Participant
    Points: 0
    Rank: Member

    Ok no problem.
    Yes i'm french.
    Sorry for my poor english (lol)

    • #68241

      Participant
      Points: 0
      Rank: Member

      Je parle pas bien anglais non plus. Je suis Français et actuellement en stage sur le sujet de l'automatisation avec Powershell DSC

  • #68242
    M

    Participant
    Points: 0
    Rank: Member

    Ok.
    Bon stage alors !
    Je réalise pour ma part un poc.
    Merci encore pour ton aide sur le sujet.

  • #68352
    M

    Participant
    Points: 0
    Rank: Member

    Done in HTTPS too.
    I'll post my configuration files soon

The topic ‘Pull Client Configuration Not found’ is closed to new replies.

denizli escort samsun escort muğla escort ataşehir escort kuşadası escort